FATEK FBs-Series Micro-Programmable Controller

                  COMPACT

HI-PERFORMANCE

RELIABLE

VERSATILE

 

Rich resources more than you can imagine...

	5 Comm. Ports with USB, Ethernet, RS485, ...
	16 sets of High-Speed Counter
	5 sets of High-Speed 0.1mS Tick Timer
	4 axes of NC Positioning Output
	16 Points of Bi-Edge Interrupt Input
	36 points of Captured Input
	Max 32 loops of temperature measurement & PID control

 

GENERAL SPECFICATIONS

	100~240VAC or 24VDC power supply
	0.33µ S/sequence instruction in average
	20K words program capacity
	Tiny Memory Pack for program and data storage
	Max. 512 points of Digital I/O
	128 points of Analog I/O (12/14-bit resolution)
	3002 points of Internal Relay
	19528 words of Data/File Register
	Real Time Clock for High Performance models
	256 Counters and 256 Timers
	Built-in digital filter for Digital Input, time constants can be set from 270nS ~ 15mS
	Windows based programming software with run-time program editing capability

 

HIGH-SPEED I/O PROCESSING

	4 sets of 32-bit Hardware High-Speed Counter with 8 operation modes (U/D, U/Dx2, K/R, K/Rx2, A/B, A/Bx2, A/Bx3, A/Bx4), counting frequency up to 920KHz.
	4 points of 32-bit software High-Speed Cyclic Counter with 3 operation modes (U/D, K/R, A/B), total frequency up to 10KHz.
	5 sets of 0.1mS time base High-Speed Timer (16-bit x 1, 32-bit x 4)
	16 points/32 kinds of external interrupt input
	Max. 36 points of captured input
	4 points of PWM output with 100 or 1000 resolution, frequency range from 72 ~ 18.432K Hz or 720 ~ 184.32K Hz respectively

 

COMMUNICATION & DATA LINK

	Up to 5 communication ports (USB, RS232, RS485, Ethertnet) max. speed up to 921.6Kbps
	Supports FATEK and MODBUS RTU/ASCII communication protocol, performs with Master or Slave role
	Supports FATEK TCP/UDP, MODBUS TCP communication protocol by optional Ethernet communication module
	Provides CPU Link function which can link up to 254 PLCs directly or through Modem or Ethernet
	Universal ASCII/RTU communication function can be used for processing of generic communication protocols
	Through Modem or Ethernet can perform the download, upload, diagnosis and control operation

 

NUMERIC CONTROL & POSITIONING

	Max.4 axes of pulse command output in one unit and pulse rate up to 920KHz/460KHz with 3 operation modes (U/D, K/R, A/B)
	Motion parameters can be changed dynamically
	Motion parameters can be uploaded/downloaded via HMI
	PLC + NC in one unit and ladder languages supports NC control program directly
	Multi-axis linear interpolation motion control
	Traking or dynamically fixed length movement control

 

TEMPERATURE MEASUREMENT & CONTROL

	Direct interface to 8 kinds of thermocouple (J, K, R, S, E, T, B, N) and Pt-100, Pt-1000 RTD sensors
	Max. 32 loops of temperature measurement & PID control

 

SPECIAL I/O MODULE

	Dedicated 7/16-segment LED display module for max. 96 Alphanumeric/192 7-seg Digits or 1024 LED Lamps display
	Dedicated multiplex input module for 4 Digits x 8 (32 Digits) thumbwheel switch input or 128 independant switch input
	High density DC Input or DC output module (24 points with 4cm x 9cm x 8cm dimension)

back to top